Joying Android 12.0 Qualcomm Snapdragon System Update

Note:

* This update is only workable for the Android 12.0 QCM6125 Qualcomm Snapdragon System car radio.

* Different updated file for different head unit version system. Please check clearly below updated tips. If you are still confused on the update details, please contact us first. Otherwise, your CarPlay/Android Auto function cannot be used after updating and you need to pay us $10 to activate this function again.

* Please update the head unit system with Windows 10 computer. this is very important.

Following is the update (2024-12-13) for Android 12.0 radio

Note：Solve the problem of no sound when making calls on CarPlay and add right-hand drive UI on the head unit.

Here is the firmware for 1280*800/1920*720/1280*720 radio with "LT". please check below exampled picture:

For example stereo model: JY-HZS01N4 JY-UZS03N4

Updated file please click Here

Here is the firmware for 1920*1080 / 1920*1200 / 2000*1200 radio with "LT", please check below exampled picture:

Updated file please click Here

Here is the firmware for 1280*720/1024*600/800*480 radios with below UI:

Only applicable for these models: UZ135N4, UZ139N4, VZ130N4, VZ131N4, HZ123N4

Updated file please click Here

Following is the update (2024-8-16) for Android 12.0 radio

Here is the firmware for 1280*800/1920*720/1280*720 radio with "LT". please check below exampled picture:

For example stereo model: JY-HZS01N4 JY-UZS03N4

Updated file please click Here

Here is the firmware for 1280*800/1920*720/1280*720 radio without "LT". please check below exampled picture:

Updated file please click Here

Here is the firmware for 1920*1080 / 1920*1200 / 2000*1200 radio with "LT", please check below exampled picture:

Updated file please click Here

Here is the firmware for 1920*1080 / 1920*1200 / 2000*1200 radio without "LT", please check below exampled picture:

Updated file please click Here

Here is the firmware for 1280*720/1024*600/800*480 radios with below UI:

Only applicable for these models: UZ135N4, UZ139N4, VZ130N4, VZ131N4, HZ123N4

Updated file please click Here

Following are the tips on how to do the system update:

Please make sure that your USB disk need to be formatted as FAT32 !!

Below are the unzipped files example:

Secondly The update will take about 5-6 minutes.

During the update process, please do not power off or reboot the stereo.

When these words appear" please remove update device device will reboot", please remove the USB disk.

Attention: The upgrade takes around 5-8 minutes. After the firmware is updated and enters the Home page, pls wait 1-2 minutes due to the system needs time to loading the files. And you may need to re-setup your settings.

Have any problem during the system update, please contact us support@joyingauto.com or info@joyingauto.com